Temadur 50

Product Data Sheet - Temadur 50 [PDF - 38kB]
Temadur 50 MED Certificate [PDF - 135kB]

Safety Data Sheet [PDF - 112kB]


A two component, semigloss polyurethane paint, hardener aliphatic isocyanate.

Product features

Recommended as a semigloss topcoat for epoxy and polyurethane systems exposed to weathering and/or chemical stress.

Recommended uses

Recommended for painting of transport and haulage equipment, storage tank exteriors, steel framework and other steel structures, machinery and equipment.

Technical Data

  • Features: Excellent weathering and abrasion resistance. A durable, easy to clean and non-chalking topcoat with good gloss and colour retention. The product has MED (Marine Equipment Directive) certificate no VTT-C-4033-15-09 and is thus accepted for painting surfaces inside the ships.
  • Colour Cards: RAL, NCS, SSG, BS, MONICOLOR NOVA and SYMPHONY colour cards. TEMASPEED tinting.
  • Gloss groups: Semi-gloss
  • Thinner: 1048, 1067 and 1061
  • Mixing ratio: Base 5 parts by volume 506-series, Hardener 1 part by volume 008 7590
  • Application method: By airless or conventional spray or by brush.
  • Pot-life (+23°C): 4 hours
  • Solids volume: 56 ± 2 % volume % (ISO 3233), 70 ± 2 % weight %
  • Density: 1.3 ± 0.1 kg / l (mixed)
  • Product code: 506-series
  • MED Certificate: PDF


Recommended film thicknesses Theoretical coverage
dry wet
40 µm 70 µm 14.0 m2/l
60 µm 110 µm 9.3 m2/l

Practical coverage depends on the application method, painting conditions and the shape and roughness of the surface to be coated.

Drying times

DFT 50 um + 5 °C + 10 °C + 23 °C + 35 °C
Dust dry, after 45 min 30 min 15 min 10 min
Touch dry, after 8 h 6 h 4 h 2½ h
Recoatable, after No limitations.

Drying and recoating times are related to the film thickness, temperature, the relative humidity of the air and ventilation.

Application details

Application conditions

All surfaces must be dry. The temperature of the ambient air, surface or paint should not fall below + 5 ºC during application or drying. Relative humidity should not exceed 80 %. The surface temperature of the steel should remain at least 3 ºC above the dew point.


Primed surfaces: Oil, grease, salt and dirt are removed from the surface by appropriate means. Repair any damage to the primer coat. Note the overcoating time of primer. (ISO 12944-4)


Temacoat GPL-S Primer, Temacoat GF Primer, Temacoat HB Primer, Temacoat PM Primer, Temacoat GPL-S MIO, Temacoat SPA, Temacoat RM 40, Temamastic PM 100, Temabond, Temadur 20, Temadur Primer, Temaprime GF, Fontecoat EP Primer and Fontecryl 10.


Temadur and Temathane


By airless or conventional spray or by brush. In order to obtain an even, non-porous finish at the airless spray application the viscosity should be 30 - 60 s DIN4. Depending on the temperature of the components (base, hardener, thinner) and the required viscosity the paint should be thinned 10 - 23 %. Airless spray nozzle tip 0.011" - 0.017" and nozzle pressure 120 - 160 bar. Spray angle shall be chosen according to the shape of the object. At brush application the paint should be thinned according to the circumstancies.

Mixing of components

First stir base and hardener separately. The correct proportions of base and hardener must be mixed thoroughly before use. Use Temaspeed Squirrel Mixer for mixing.

Cleaning of tools

Thinner 1048, 1067 or 1061

EU VOC 2004/ 42/EC-limit value

The Volatile Organic Compounds amount is 420 g/litre of paint mixture.
VOC content of the paint mixture (thinned 23 % by volume) is 495 g/l. Only for industrial use.

Health and safety classification

Containers are provided with safety labels, which should be observed. Further
information about hazardous influences and protection are detailed in individual health and safety data sheets. A health and safety data sheet is available on request from Tikkurila Oyj.

Related Products