Valtti Mould Removal Solution
Data Sheet - Valtti Mould Removal
Description
Hypochlorite solution for the removal of mould and algae from both previously painted and unpainted surfaces.
Preparation
Remove dirt and all loose and flaking material.
Application
Sponge, brush or low pressure garden spray.
Directions for use
Mix Mould Removal Solution with water in the ratio of one part Mould Removal Solution to four parts water. To avoid possible streaks apply the mixture working from the bottom to the top of the area to be treated. Allow at least ½ an hour for the solution to react against the mould affected areas. For badly moulded surfaces apply the mixture wet-on-wet until the mould disappears. After treatment wash down all surfaces with clean water and allow to dry thoroughly.
Note: When using Mould Removal Solution wear appropriate safety clothing i.e. gloves and eye protection in case of splashing.
Cleaning of Tools
Clean immediately after use with water.
Environmental
Empty cans should be recycled or disposed of in accordance with local regulations. Liquid waste should be destroyed according to the local regulations.
Health and Safety Classification
Corrosive, C
Contains: Sodium Hypochlorite, Sodium Hydroxide.
Causes burns. Irritating to eyes and skin.
Warning! Do not use together with other products. May release dangerous gases (chlorine).
A Material Safety Data Sheet is available on request.
Transport and Storage
ADR/RID -
Protect from frost.
