SUPI Saunapesu Sauna Cleaner
Data Sheet - SUPI Saunapesu Sauna Cleaner
Description
SUPI Saunapesu is an acidic cleaning agent which disinfects, bleaches, and dissolves lime scale deposits in saunas and other humid rooms.
Examples of use
For sauna and other humid rooms. Gentle and thus non-corrosive. However, care should be taken when cleaning tile joints with concentrated or strong solutions. Do not use together with products containing chlorine.
Technical Data
- Density: 1.03 kg/l, ISO 2811
- Thinner: Water
Application
Methods: Brush or sponge.
Application Conditions
The surface to be painted must be dry, the temperature of the air and the surface at least +5 ºC, and the relative humidity of the air below 80 %.
Dosage
Depending on the degree of contamination, add 1 to 2 dl of Supi saunapesu to 5 litres of water.
Dissolving of lime
Use a 10-15% solution. Supi Saunapesu can be used un-thinned on persistent lime scale deposits and rust.
Bleaching of saunas
Mix equal amounts of SUPI Saunapesu and water, and allow to act for approx. 15 minutes.
Note! Always rinse the surface with fresh water after treatment.
Cleaning of Tools
Clean with water.
Storage
Protect from frost.
Environmental
Empty cans should be recycled or disposed of in accordance with local regulations. Liquid waste should be destroyed according to the local regulations.
Health and Safety Classification
Corrosive, C
Contains: Phosphoric acid < 5 % CAUSES SEVERE BURNS. Wear suitable protective clothing, gloves and eye/face protection. In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. Take off immediately all contaminated clothing. Do not breathe vapour. Use only in well-ventilated areas. In case of accident or if you feel unwell, seek medical advice immediately (show the label where possible). Keep locked up and out of the reach of children. Contains < 5 % non-ionic surfactants, < 5 % cationic surfactants and < 5 % perfumes. A Material Safety Data Sheet is available on request.
Transport
ADR/RID 8 III
