Pirtti Interior Wood Stain

Description

Waterborne acrylic stain designed for indoor wood surfaces.

Application

Furniture, floors, ceilings, doors and the like wooden surfaces.

Technical Data

Solid Content: About 1 g/cm3
Light resistance: good
Base: EP

Specifications

Surface Preparation:

Unpainted surfaces: Sandpaper, and carefully remove the dust.
Previously painted surfaces: sand layer to the previously painted wood.

Application

Methods: Brush, roller or spray foam.
Thinner: Water

Application conditions

Ensure substrate is dry and clean. Air temperature, surface or paint should be min. +5 ° C, humidity of the air may not exceed 80%

Painting

Mix the product immediately before use. On a small test area make an attempt to apply colour. Tint stain will vary depending on the porosity,
hardness and color of the wood. Colour will also depend on the thickness of the layer to be levied - if in some places the stain is too thick, you should expect a different shade of the surface after drying.

Paint once the substrate by brush, roller or spray foam. Please note that malotion of the surface should be carried out without interruption, to avoid the difference in shades. Lighter shade is achieved by diluting the product with water. If a darker shade is desired, please apply 2, 3 layers.

Coverage

10-12 m2 / l.

Drying time

At a temperature of 23 ° C and a humidity of 50%: Touch dry after 1 -2 hours. Recoatable after 4-6 hours.

Cleaning of Tools

Tools should be cleaned with water immediately after use.

Environmental

Empty cans should be recycled or disposed of in accordance with local regulations. Liquid waste should be destroyed according to the local regulations.