Kiva Floor Priming Lacquer
Data Sheet - Luja Universal Primer
Description
Waterborne low-odour polyurethane-acrylate priming lacquer for use on bare interior wooden surfaces prior to the application of Parquet-Ace Floor Lacquer.
Examples of use
Parquet flooring, particle and floor boarding, etc. Parquet-Ace Floor Primer is not recommended for diamond pine, smoked oak or stabilized brown beech surfaces.
Technical Data
- Solids Volume: approx. 35%
- Density: 1.0 kg/l
- EU VOC 2004/42/EC-limit value: (cat A/i) 140g/l(2010) Parquet-Ace Priming Lacquer contains VOC max. 140g/l.
Specifications
Preparation
Surfaces must be clean, dry, and free from grease, dirt, oil, wax, rust, all loose material and surface contamination. Fill cracks, nail holes, etc. with a good quality wood filler or by using a filler made by mixing Parquet-Ace Floor Primer with the wooden sanding dust. Ensure that all filled and prepared surfaces are thoroughly flatted down. Remove all sanding dust.
Application
Methods: brush, mohair roller or spreader. Polyester or nylon paint brushes are best suited for the application of the priming lacquer.
Thinning: if necessary by up to 5% with water.
Painting conditions
All surfaces to be painted must be dry, the temperature of the air at least 15C, and the relative humidity of the air below 80%.
Painting
Stir lightly before use. Do not whip air into the lacquer. Apply one coat of Kiva Floor Primer working in the direction of the wood grain and allow to dry for approximately one hour. If necessary lightly sand down and dust off. Apply a further one or two coats of Parquet-Ace Floor Primer allowing 30-60 minutes between coats.
Coverage
15-25 m2/litre per coat. Actual spreading rates will depend upon many factors including texture, porosity, moisture content of the substrate and method of application.
Drying Time
At 23C and 50% relative humidity of the air: normally touch-dry in ½ hour and recoatable after one hour.
Cleaning of Tools
Clean with water immediately after use.
Environmental
Empty cans should be recycled or disposed of in accordance with local regulations. Liquid waste should be destroyed according to the local regulations.
Health and Safety Classification
Not classified as hazardous for health. Handle with care, avoid prolonged contact with skin and breathing of spray mist.
A Material Safety Data Sheet is available on request.
Transport and Storage
ADR/RID
Protect from frost.
